A-Z Product List

1-9
24/7 Technical Assistance Center (TAC) Support
This extends TAC services typically available only during normal business hours to 24 hours a day, 7 days a week. Pricing is based on the size of the installed base.

3GMA Drive Test Tool
3GMA measurement solution for GSM/GPRS/EDGE/UMTS/HSPA mobile communication networks.

40G Transport Module for T-BERD®/MTS-8000 Platforms
1.5 Mb/s to 40 Gb/s fiber characterization, service verification, and troubleshooting with ITU-T and GR-253-compliant optics, optical power measurement, and frequency offset adjustment and measurement.


A
ACT Autonomous Coverage Tester
Equipment for unattended measurement of GSM/GPRS/EDGE/UMTS/HSPA Mobile Communication Networks.

ANT-5 SDH Access Tester
Installation and commissioning solution for SDH, SONET, PDH, and ATM access networks with line rate testing from 1.544 Mb/s to 2.5 Gb/s.

Assets and Certified Equipment (ACE) Program
The JDSU Assets and Certified Equipment (ACE) Program offers customers outstanding pre-owned JDSU test equipment with equal quality and benefits as if new.


B
Base Station Analyzer JD7105A
Multi-purpose analyzer for CDMA (IS-95, IS-2000, EV-DO, WCDMA/ HSDPA) and GSM, GPRS and EDGE base stations and repeaters.

Baton Video Content Verification Software
Verifies and checks quality of digital media content.

Benchtop Broadband Source
Broadband Source that emits a higher optical output than conventional EELEDs and operates over the EDFA (1525-1610 nm) window.

Benchtop Erbium-Doped Fiber Amplifier
Amplifies optical signals across the EDFA window (1528-1610 nm).

Benchtop/Rackmount Programmable Switches
Programmable benchtop/rack-mount switches that can be controlled from front panel keys and numeric pad or via GPIB and serial RS232 interface.

Blended Learning
Take advantage of both on-site training and Virtual Classroom to maximize the learning experience.

Bus Doctor 1.5 and 3G SATA Protocol Analyzer
The Serial ATA Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics that are needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration post-capture filtering of Serial ATA packets.

Bus Doctor ATA/ATAPI/UDMA Protocol Analyzer
The ATA/ATAPI/UDMA Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding, and statistics needed by software and systems testers. The ATA/ATAPI pod supports both normal and small form-factor connectors.

Bus Doctor CardBus Protocol Analyzer
The CardBus Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of CardBus transfers.

Bus Doctor CE-ATA and MMC Protocol Analyzer
Without a CE-ATA protocol analyzer, storage, silicon and design engineers will find working with this new storage technology challenging.

Bus Doctor Compact Flash Protocol Analyzer
The Compact Flash Pod turns the Bus Doctor into a full-featured protocol analyzer, supporting 3.3V systems, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of Compact Flash transfers.

Bus Doctor Family Overview
With its modularity, portability, deep trace buffers, versatile configurability, and feature-rich software, the Bus Doctor Rx is the world's most powerful protocol analyzer. The Rx is compatible with all Bus Doctor protocol analyzer bus pods, the industry's largest selection.

Bus Doctor Logic Protocol Analyzer
The Logic Pod turns the Bus Doctor into a full-featured logic analyzer, with the depth, ease-of-use, symbolic decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis. Each Logic Pod has 18 channels for logic analysis.

Bus Doctor PCMCIA Protocol Analyzer
The PCMCIA Pod turns the Bus Doctor into a full-featured protocol analyzer, supporting 3.3V systems, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers such as multi-level triggering, filtering, state configuration and timing analysis of PCMCIA transfers.

Bus Doctor SCSI Protocol Analyzer
The SCSI 320 Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of SE and LVD transfers.

Bus Doctor SD/SDIO/MMC Protocol Analyzer
The Bus Doctor RX SD/SDIO/MMC protocol analyzer allows storage, silicon, and design engineers working with this technology to capture, decode and analyze bus states, command tokens, and response tokens, and to measure bus performance.

Bus Doctor USB Protocol Analyzer
The USB Pod turns the Bus Doctor into a full-featured protocol analyzer with the depth, ease-of-use, protocol decoding, and statistics needed by software and systems testers. It supports Low, Full and High speeds (USB 1.1 and 2.0) and has a special Chirp mode for viewing the chirp handshaking activity. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of USB transfers.


C
Cable and Antenna Analyzers JD724B/JD723A/JD725A
Portable, lightweight instrument for troubleshooting and maintaining wireless base stations and repeaters.

Calibration Plan Manager
Provides monthly reports detailing the status of your instruments in the calibration program.

Call Generators and QoS Monitoring
Network load generation tool for testing and qualifying voice and packet (VoP) networks based on POTS, PBX, ISDN, GSM, soft switches, and media gateways.

CD Plug-in Module for T-BERD®/MTS-6000, -6000A, -8000 Platforms
Fast, cost-effective chromatic dispersion (CD) testing for metro DWDM deployment.

CleanBlast™ System - Portable
Advanced Fiber Optic Connector End Face Cleaning System

CLI-1750/LST-1700 Home Wiring Test System
Combination leakage and signal level meter and home wiring test kit.

CLI-950, CLI-1450, and CLI-1750 Cable Leakage Meters
Combination leakage and signal level meters.

CN-100 Network Performance Tester
Tests Ethernet or ATM networks using multi-port CN-100 portable or rack-mounted chassis with speeds up to 10G.

Coax Mapper
Tests CATV and security camera coax connections and installations.

Compact Photonic Tools Fabry-Perot Laser (cFPL-A1)
Compact, intuitive laser source for applications ranging from continuity verification and insertion loss testing to integration into process automation equipment designed for robotic alignment.

Compact Photonic Tools Optical Power Meter (cOPM-A1)
Optimized for applications ranging from general lab use to test and process automation for passive optical components.

Compact Photonic Tools Optical Return Loss Meter (cORL-A1)
Enables applications from continuity verification and return loss testing to integration into process automation equipment designed for robotic alignment.

Copper Services Module for the T-BERD®/MTS-4000 Multiple Services Test Platform
Module for comprehensive copper installation, testing and maintenance up to full-spectrum 30 MHz VDSL for FTTx and Access networks.

CT-650 CENTEST Wideband Test Unit
Centralized test system providing multiple simultaneous tests from a single equipment shelf for DS3, DS1, and DS0 service rates; supports GSM and VF testing.

CWDM OTDR Plug-In Modules for T-BERD®/MTS-6000, -6000A, -8000 Platforms
In-Service CWDM OTDR test solution to maintain and troubleshoot CWDM fiber networks.


D
DA-3200 Data Network Analyzer
Easy-to-use troubleshooting tool for WAN-based IP services.

DA-3400 Data Network Analyzer
Easy-to-use troubleshooting tool for IP-based services across Ethernet, WAN, and ATM networks.

DA-3600A Data Network Analyzer
Advanced troubleshooting tool for IP-based services across Ethernet, WAN, and ATM networks.

Distributed Test Manager 32
Allocate valuable testing and troubleshooting resources more effectively via remote PC access to JDSU communications analyzers.

DiviSeries DVB Pocket Analyzer
DVB/MPEG transport stream tester for analysis, simulation and generation.

DMTS Benchmarking Testing System
Benchmarks GSM/GPRS/EDGE/UMTS/HSPA Wireless Networks.

DSAM Digital Service Activation Meter
Handheld field meter for DOCSIS/EuroDOCSIS cable modem installation; enables cable installers to increase the speed and efficiency in deploying high-speed data and video services.

DSAM-6000 Network Maintenance Sweep Meter with DOCSIS / EuroDOCSIS Capabilities
Combines triple-play services testing, forward and return path maintenance, and Stealth Sweep™ Technology to deliver award-winning performance.

DTS-200 MPEG-2 Field Instrument
Provides remote visibility into MPEG-2 streams to perform test applications.

DTS-330 Digital Broadcast Test Platform
Digital broadcast test platform performing MPEG-2 ATSC and DVB transport stream analysis, simulation, and generation.

DTS-A: The DTS-330 Analyzer Configuration
Transport stream analyzer that helps solve configuration, interworking, and performance issues by isolating and diagnosing problems in the transport stream.

DTS-G: The DTS-330 Generator Configuration
Transport stream generator that captures and plays MPEG-2 transport streams for equipment validation and testing.

DTS-M: The DTS-330 Multiplexer Configuration
Transport stream multiplexer that allows users to create complex MPEG-2 transport streams for testing digital televisions or set top boxes.

DVB-T/H Lab Modulator
LabMod-DVB-T/H modulator provides a complete, cost-effective solution for Digital TV network setup in a lab or manufacturing environment, cumulating rich inputs/outputs interfacing offer, as well as test modes and channel simulator.


E
Education Services
JDSU's Education Services include a wide array of courses, from product training to technology fundamentals, guaranteeing that your staff will get the exact information they need to improve on-the-job performance.

EFL-10 Fault Locator Bridge
Microprocessor-controlled cable measuring instrument for fast, accurate fault location and quality testing of telecommunication cables.

ELA-10 Data Line Analyzer
Monitors all analog transmission parameters within the frequency range of 20 Hz to 20 kHz; copper test set for lines carrying low rate data services.

ELQ2 xDSL Line Qualifier
For prequalification, installation, and maintenance of balanced copper pairs.

Enterprise Services Application Module (ESAM) for the T-BERD®/MTS-4000 Platform
The industry’s broadest range of enterprise test capabilities in a single tester for IT organizations that maintain Ethernet/IP Local Area Networks (LANs).

Environmental Test System (OCETS Plus)
Integrated automated test facilities for testing long-term reliability of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.

EST-125 and EDT-135 E1 Data Testers
Scalable solutions for E1 and data circuits as well as service testing.

ETDR-10 Cable Fault Locator
Provides fast and accurate discontinuity location of balanced telecommunications cables.

EtherNID™ and MetroNID™ Packet Assurance Demarcation Units
Family of packet assurance demarcation units that offers a wide range of demarc solutions for demanding wireless backhaul and business services applications.

ETT-10 Telephone and Exchange Tester
For testing subscriber lines, exchanges, and PABXs; tests subscriber telephone sets and other terminal equipment such as faxes and meter pulse counters.

Extended Warranty
Eliminates unexpected expenses associated with repairs by extending coverage beyond the standard warranty. Warranties can be prorated to align warranty expiration and simplify renewal.


F
Factory Calibration Services
Provides ISO-certified calibration. Factory calibration services install ECNs.

Factory Repair
Either flat-rate pricing or time-and-materials pricing is available. Factory repair services install ECNs.

Falco High Density Groomer
Platform designed to offer access to SDH/SONET and Gigabit Ethernet backbone by traditional WAN and LAN equipment.

FBE Probe Microscope
Handheld Analog Video Probe Microscope for Basic Fiber Inspection

FBP Probe Microscope
Handheld Analog Video Probe Microscope for Fiber Inspection

FDM-100 Field Data Management Software
Client software application that supports the DSA.

FFL-050 Pocket-sized Visual Fault Locator
Pocket-sized Optical Fiber Damage/Break Locator

FFL-100 Ruggedized Visual Fault Locator
Ruggedized Optical Fiber Damage/Break Locator

FI-10 and FI-11 Optical Fiber Identifier
Identifies optical fibers by detecting the optical signals being transmitted through a single-mode fiber.

Fiber Characterization Service
A complete end-to-end fiber characterization test and consulting service for carriers and enterprises measuring overall fiber quality.

Fiber Inspection Upgrade Kit for T-BERD™/MTS Platforms
FBP Video Probe Microscope & USB 1.1 Analog-to-Digital Converter

FiberChek2™ & P5000 Digital Probe Microscope
Automated Fiber Inspection and Analysis Software & Probe

FIMAS Post-processing System for Reporting and Analysis
Supports GSM/GPRS/EDGE/UMTS/HSPA wireless networks.

FIREBERD 8000
TestPad datacom analysis module with a variety of interfaces that support installation, troubleshooting, and maintenance of network elements and circuits.

Flexible Small Channel Count Switch Module
Ideal for applications requiring high optical performance in latching or non-latching applications.

FM-C Field Microscope
Coaxial Illumination Handheld Optical Microscope for Fiber Inspection

FM-DI Field Microscope
Dual-illumination Handheld Optical Microscope for Fiber Inspection

FM-E Field Microscope
Oblique llumination Handheld Optical Microscope for Fiber Inspection

FM-L Field Microscope
Oblique Illumination Handheld Optical Microscope for Fiber Inspection

Fovea - Video Streaming Analyzer
In-line impairment test solution for Ethernet backhauling.

FST-2000 TestPad (Version 6 UIM)
The latest TestPad platform providing process improvement and back-office integration.

FST-2310 TestPad
DS1 to OC-48 handheld, battery-operated test set with integrated SONET measurements.

FST-2802 TestPad
Metro Ethernet services testing in a handheld test set; performs traffic generation/test, BER testing, and verifies Metro Ethernet SLAs.

FVA Benchtop Microscope with FiberChek2™
FVA Benchtop Microscope fully automates the inspection process and is used to detects scratches that technicians may miss. FiberChek2™ then provides Pass/Fail results.

FVD Benchtop Microscope & FiberChek2™
Benchtop Microscope & Automated Inspection & Analysis Software


H
HD1 Display with 3.5-inch LCD
Westover HD1 Handheld Display with 3.5-in LCD for use with FBP-series probes

HD2 Display with 3.5-inch LCD
Rugged, Versatile Handheld Display with 3.5-inch TFT LCD

HD3 Display with 1.8-inch TFT LCD
Small Form-factor Display with 1.8-inch TFT LCD

HD3-P Display with Integrated Patch Cord Microscope
Integrated patch cord viewing microscope for significant increase in workflow efficiency and decreased total inspection time.

High Density TAP
The High Density (HD) TAP changes this by providing 16 TAPs in a 1U rack mountable chassis.

HP3-60 Fiber Inspection and Test System with Integrated Power Meter
Handheld display system featuring an integrated power meter (OLP-6) that lets users inspect and test fiber with one device; includes a dedicated patch cord microscope.

HST-3000 Handheld Services Tester
Modular, access network tester for VoIP, IPTV, and the installation and maintenance of next-generation FTTx and PON-based triple-play services.

Hydra LR1021 802.3ba 100G Ethernet Stress Blade
The LR1021 is used in the Hydra test system for 802.3ae compliant stressed receiver testing.

Hydra LR112 802.3ae 1310nm Stress Blade
The LR112 is used in the Hydra test system for 802.3ae compliant stressed receiver testing.

Hydra LRM110 802.3aq 1310nm Stress Blade
The LRM110 is used in the Hydra test system for 802.3aq/SFF8431 compliant stressed receiver testing.

Hydra PGM117 Electrical Pattern Generator/Error Detector Card
The PGM117 is used in the Hydra test system as a source of PRBS or 10G Ethernet traffic for all 10G stress cards and as an error detector.

Hydra SFPP115 802.3aq Electrical Stress Blade
The SFPP115 is used in the Hydra test system for 802.3aq/SFF8431 compliant stress testing of EDCs and Host cards.

Hydra SR118 802.3ae 850nm Stress Blade
The SR118 is used in the Hydra test system for 802.3ae or FC-PI-5 Fiber Channel compliant stressed receiver testing.

Hydra Stressed Signal Test Solutions
The JDSU Hydra product line offers the industry’s leading SFP+, 10 GigE, and 100GE stressed signal test solutions.


I
IL/ORL Plug-In Module for T-BERD®/MTS-6000, -6000A, -8000 Platforms
Automated bidirectional loss test set for continuity check, fiber loss, return loss and length for transport, metro, access, and FTTx/PON networks.

Infineon Module and Dr. DSL® Software Option for the T-BERD®/MTS-4000 Multiple Services Test Platform
Optional Infineon Technologies chipset and licensed option for Dr. DSL diagnostic solutions from Aware, Inc. for testing high bit-rate triple-play services, including HDTV and IPTV.

Instrument Tracking and Management
JDSU will inventory the customer's equipment, manage the information in a database, and provide information regarding when the equipment is due for calibration or an upgrade. Recommendations are based on the customer's applications.

Iris High Density Groomer
High density non-blocking E1/T1 timeslot matrix switch designed to work jointly with monitoring equipment including protocol analyzers and probes.

ISS-5116 Input Selector Switch
16x1 5-1000 MHz, 75 Ohm, RF input switch controlled by the RSAM to provide monitoring at up to 128 different test points.


L
LanRoamer™ Cable Tester
Cable tester identifies multiple faults on main and remote unit, initiates tests with Auto-on, and generates tone.

LanRoamerPRO™ Cable Tester
Cable tester conducts single-ended continuity tests, measures length, and generates tone; results displayed in wiremap format on two-line, 16-character LCD display.

LanScaper™ Network Tester
Network tester detects active devices up to 100 Mb/s, pings, blinks link indicators on remote devices, tests cabling configuration, displays cable length, and generates tones.

LanScaperPRO™ Network Tester
Network tester measures PoE, detects active devices up to 1 Gb/s, pings, blinks link indicators, tests cabling configuration, displays cable length, and generates tones.

Large Channel Count Switch Module
JDSU modular 1xN controllable switches are designed to connect a single optical channel to any of N channels.

Latch-Test™ Security Alarm Tone Generator
A combination advanced tone generator and continuity tester for sensors, switches, and circuits used in security/alarm systems.

Lil' Buttie Butt-In Telephone Test Set
Identify POTS dial tone.

Lil' Buttie Pro Butt-In Telephone Test Set
Identify POTS dial tone and view Caller ID, stored numbers, and other data on LCD display.

Lil' Buttie™ Ranger Butt-In Telephone Test Set
DSL-safe operation to identify POTS dial tone and view Caller ID, stored numbers, and other data on LCD display.

Local Loop Test Solutions
Compact, user-friendly, and powerful handheld analog transmission test set.


M
MAP Broadband Source
Cassette that combines the optical performance of the JDSU BBS-Series benchtop instrument with the flexibility and modularity of the MAP.

MAP Erbium-Doped Fiber Amplifier
Cassette that combines the optical performance of the JDSU OAB benchtop portfolio with the flexibility and modularity of the MAP.

MAP Fabry-Perot Laser
Cassette that produces a stable light source at desired wavelength.

MAP Large Channel Count Switch
Bidirectional Stepper-Motor Based Switch Cassette that allows connection of a common port to up to 50 channels.

MAP Light Emitting Diode Source
High-power LED-based light source with variable output power.

MAP Optical Power Meter
Cassette that uses a 3 mm InGaAs detector to measure from 10 to -80 dBm over the wavelength range of 800-1650 nm.

MAP Polarization Controller
Cassette that provides an efficient and precise way of creating any state of polarization.

MAP RF Switch
Cassette that provides a 50 ohm coaxial switch for routing RF and microwave signals at frequencies up to 26.5 GHz.

MAP Small Channel Count Switch
Prism-Based Switch Cassette that accommodates a number of switches with varying channel counts and latching modes at a low cost.

MAP Tunable Filter
Tunable bandpass filter that offers continuous wavelength tuning from 1420-1630 nm.

MAP Tunable Laser
External cavity tunable diode laser that offers exceptional speed, accuracy, and flexibility, making it the ideal source for advanced fiber optic systems and component testing.

MAP Utility
Cassette that simplifies mechanical integration of passive optical components for test sets.

MAP Variable Backreflector
Provides precise levels of return loss to transmitters, which allows measurements of system sensitivity or system degradation as a function of backreflection.

MAP Variable Optical Attenuator
High-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.

Medusa Labs Test Services
Medusa Labs offers an array of services specifically designed for various product maturity levels. Whether your product is still in the alpha and beta phases or ready to ship, we have a service that is suited for you.

Medusa Labs Test Tools Suite
With over 10 years' experience in Fibre Channel SAN testing and validation, JDSU's Medusa labs brings its years of hands-on expertise and knowledge in the test and validation arena and puts it directly into this test suite.

Modular Adapters
Gain circuit access without disconnecting equipment; angled sturdy copper contacts prevent clips from disconnecting during testing.

MP-60 and MP-80 Miniature USB 2.0 Power Meters with FiberChek2™ Integration
Measures optical power via a USB 2.0 connection to a PC/laptop - makes digital processing of optical power measurements possible and integrates directly with the JDSU FiberChek2™ software.

MS-1200, MS-1300, and MS-1400 MicroStealth Signal Level Meters
Full line of analog and digital testing signal level meters designed for installers troubleshooting advanced networks.

MSQ Handheld QAM Signal Level Meter
The MicroStealth QAM signal level meter is the ideal tool for installation and field technicians seeking to quickly ensure the quality of RF analog and digital cable services.

MTS-4000 Multiple Services Test Platform
Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance.

MTS-6000 Compact Optical Test Platform
Compact, lightweight test platform for installing and maintaining fiber networks; performs full fiber characterization measurements.

MTS-6000A Compact Network Test Platform
Multi-layer compact network test solution for network installation and maintenance of metro core networks.

MTS-8000 Scalable Optical Test Platform
Completely scalable solution for optical network installation, commissioning, maintenance, and troubleshooting.

Multi Services Application Module for T-BERD®/MTS-6000A Platform
Industry’s most compact 10-Gigabit Ethernet multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services.

Multichannel Backreflection Meter (RX Series)
Performs a wide range of single-mode or multimode return loss and loss measurement functions, ranging from single component testing to automated multifiber testing.

Multiple Application Platform (MAP-200)
Flexible instrumentation platform for optical or electro-optical test and measurement applications.

MVP-200 (MPEG Video Probe)
Rack-mounted remote-accessible MPEG video analyzer that utilizes the same powerful analysis engine as the DTS-330.


N
NetAnalyst Test Management Software
Enables service providers to automate test and troubleshoot with centralized testing of private lines, xDSL, and Ethernet/backhaul services.

NetComplete® for Ethernet Business Services
NetComplete Metro Ethernet Service Assurance solution eliminates the Ethernet provisioning verification and troubleshooting challenges facing service providers today.

NetComplete® Home Performance Management
Enables multi-play service providers to gain visibility into their customers’ quality of experience as seen at the home.

NetComplete® Service Assurance for Ethernet
Addresses the entire Ethernet Service deployment life cycle including turn-up acceptance, SLA/performance monitoring and reporting, and test and troubleshooting.

NetComplete® Service Assurance for Mobile Backhaul
Provides comprehensive coverage for both TDM and Ethernet including test and troubleshooting, continuous service and network performance monitoring, and SLA monitoring/reporting.

NetComplete® Service Assurance for Wireless (RCATS)
Allows service providers to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing field dispatches and trouble tickets.

NetComplete® Service Assurance for xDSL
Comprehensive system for commissioning, troubleshooting, and managing xDSL services including pre-qualification, turn-up, spectrum management, narrowband/wideband copper, and xDSL service testing.

NetComplete® Video Service Assurance Solutions
Video service assurance solution that provides quality of service monitoring, in-depth visibility, problem detection and fault isolation capabilities.

NetOptimize® Operations Support System
Provides performance management capabilities including data collection, correlation, analytics and reporting enabling service providers to proactively identify faults, quickly troubleshoot and resolve problems as well as perform trend analysis and capacity planning over time.

Net-Rite™ Continuity and Wiremap Tester
Detect and troubleshoot faults and miswires in network cable.

Network Synchronization Equipment
Supports synchronization and timing in wireline/wireless telecom networks and enterprise IT networks.

NewGen 2.5 SDH/SONET Module for T-BERD®/MTS-8000 Platforms
All-in-one tool for testing Ethernet transported over SDH/SONET networks using GFP, virtual concatenation, and LCAS.


O
Observer RPM (Remote Program Monitor)
Evaluates the quality of NOC/headend and remote hub site broadcasts from a central location.

OCC-55 SMART Optical CWDM Channel Checker
Compact, low-cost test solution for installation, maintenance, and upgrades of CWDM networks.

OCC-56 SMART Optical DWDM Channel Checker
Compact, low-cost test solution for installation, maintenance, and upgrades of DWDM networks.

OCK-10 Optical Cleaning Kit for SMART Optical Handhelds
Optical cleaning kit for connector cleaning and maintenance; designed for the JDSU SMART optical handhelds.

OFI-2000 Multifunction Loss Test Set
Supports installation and maintenance of fiber optic networks.

OFM-500 Optical Fiber Mapping Software
Complete software application for the design, documentation, and maintenance of fiber optic outside plant facilities; part of the ONMS family.

OFS-100 Optical FiberTrace Software and OFS-110 Free Viewer
PC software for OTDR trace analysis.

OFS-200 Optical Fiber Cable Software
PC software for cable trace analysis.

OFS-310 Optical Fiber Budget Software for the OFI-2000 Optical Installation Tester
The easiest way to generate bidirectional insertion loss reports.

OFS-355 SMART Optical Reporting Software
Expedites test results reporting in the field.

OIM-400 Optical Inspection Miscroscope
Handheld inspection microscopes that utilize a white LED for coaxial illumination.

OLA-54 and OLA-55 SMART Optical Level Attenuators
Supports system testing, installation, maintenance, and production of single-mode fibers; instruments are 40 Gbps ready due to low Differential Group Delay.

OLA-55M SMART Motorized Optical Level Attenuator
Variable optical attenuator with an automatic level controller mode in a single, rugged, handheld instrument.

OLP-34, OLP-35, and OLP-38 SmartPocket™ Optical Power Meters
A family of pocket-sized and low-cost optical power meters for the installation and maintenance of singlemode and multimode fiber optic networks.

OLP-4057 PON Selective Power Meter Module for T-BERD/MTS-4000 Platform
Designed for FTTx service activation and maintenance.

OLP-55 and OLP-57 SMART Optical Power Meters
Supports installation, maintenance and testing of single-mode and multimode networks and cables.

OLS-34, OLS-35, and OLS-36 SmartPocket™ Optical Light Sources
A family of pocket-sized and low-cost optical light sources for the installation and maintenance of singlemode and multimode fiber optic networks.

OLS-55 and OLS-56 SMART Optical Laser Sources
Handheld laser sources offering flexibility to test, install, and maintain single-mode and multimode fiber optic networks for every application from PON to Gigabit Ethernet.

OLT-55 SMART Optical Loss Test Set
Universal instrument for single-mode fibers from lab through to installation, maintenance, and troubleshooting.

OMK-34, OMK-35, OMK-36, OMK-38 SmartPocket™ Optical Test Kits
include a light source (OLS-3x), a power meter (OLP-3x), and additional accessories.

OMK-55 SMART Optical Test Kits
Can contain an optical power meter, an optical light source, an optical attenuator, and accessories in a carrying case.

On-Site Calibration for Communications Test Equipment
ISO-9001 and 9002 calibration service for JDSU and OEM equipment including electrical, optical and data/IP test instruments

On-Site Testing Services
Fiber characterization, fiber qualification, functional testing, burn-in testing, and jitter/wander measurements are some of the tests that we perform for customers. JSDU, a manufacturer of communication test equipment, provides third-party independent testing with expertise, short lead-times, and excellent reports for a competitive price.

On-Site Training
Provides training for eight students at a customer-specified location. Courses cover technology and applications for the specified technology or product.

ONT 40/43G
Testing and verification for physical and transport layer, jitter and wander at bit rates of 40/43G with unframed signal and framed signals for SDH/SONET/OTN.

ONT DSn/PDH Single/Dual Port
Tests boards and systems with combined transport technology and DSn/PDH services; provides testing functionality for T-carrier and E-carrier signals including multiplex chains.

ONT Ethernet
Addresses the need for evaluating fully interworking New Generation SONET/SDH with Ethernet services at electrical and optical interfaces.

ONT G.709 OTN
Provides full functionality for system verification of G.709 equipment, including extensive FEC testing.

ONT High-Accuracy Jitter/Wander
Jitter/wander generation and analysis of 155 Mbps to 10 Gbps SONET/SDH, 2.7 G and 10.7 G OTN (G.709) signals to ITU-T jitter/wander standards O.172/O.173.

ONT Module-E 10G Electrical Interfaces
Provides high voltage differential electrical interfaces for 10G clock and data; tests XFPs, SFP+ with test boards as well as high load multiple receivers in production.

ONT Module-E 10G LAN/WAN/OTN
Tests boards and systems with transport and data technology including 10GigE LAN and WAN with Ethernet and IP traffic including OTU2 G.709 and OTU2 overclocked.

ONT Module-E 10G OTN
Addresses standard G.709 and overclocked OTU2 rates with different clients: BULK, Layer 1 Ethernet and Fibre Channel, and Layer 2/3 10GigE.

ONT Module-E 10G SDH/SONET and Multi-Channel
Supports SDH and SONET with STM-64c/OC-192c BERT and can analyze up to 192x STS-1/ 64x AU-3/4 channels simultaneously; allows concatenated mappings to STS-1/AU-3/4.

ONT Multi-Channel
In combination with ONT 2.5G and 10G, allows generation and analysis of up to 1,000 simultaneous VC-12/VT1.5 channels in 2.5 and 10 Gbps signals.

ONT NewGen EoS
The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation with LCAS emulation, Generic Frame Procedure, and Ethernet MAC frames.

ONT Optical Network Tester Family
Highly configurable, multi-application and multi-port platform for system verification and acceptance testing.

ONT SONET/SDH
SONET/SDH modules that offer the highest degree of flexibility for multi-port applications.

ONT-100G Test Solution Supporting 40GE/100GE/OTU4
The ONT-100G solution supports testing and verification for new high-speed network elements for 40GE and 100GE Ethernet. It allows the evaluation of the physical layer, PCS / MAC layers, and QoS testing at bit rates of 40GE and 100GE.

ONT-503 Optical Network Tester
Portable solution that supports ONT modules for 40/43G, Carrier Ethernet and Multichannel; designed for SVT groups at network manufacturers as well as service providers.

ONT-506 Optical Network Tester
Portable solution that offers multi-channel test and multi-port configuration capabilities for manufacturers development and system verification for transport testing up to 40/43G.

ONT-512 Optical Network Tester
Rack-mounted solution that provides multi-channel test and multi-port configuration capabilities for manufacturers development and system verification.

On-the-Job Training
As an add-on to on-site training, the instructor will work with the technicians while they apply the knowledge and skills that they were just taught. This provides an opportunity to suggest adjustments or changes based on variances of the customer's network or work environment.

OPERA Voice and Audio Quality Analyzer
Evaluates and assures quality of compressed voice and wide-band audio signals, based on modelling the human ear.

Operational Planning for New Services
JDSU Consulting team helps operators prepare for the deployment of new services which includes process design, tools and monitoring strategy, and Service Assurance optimization.

Operationalization of Service Assurance Systems
The service supports a wide range of residential and business services, including enterprise networking and carrier services.

Optical Accessories
For the installation and maintenance of fiber optic networks.

Optical Dispersion Modules for T-BERD®/MTS-6000, -6000A, -8000 Platforms
Smallest and most compact plug-in module combining PMD, CD, and Attenuation Profile measurements.

Optical Handheld Family of Test Instruments
Family of handheld instruments ready to support the newest applications including FTTx, CWDM, DWDM, 40 Gbps, Ethernet, and Gigabit Ethernet.

Optical Network Management System (ONMS)
Optical network performance and monitoring system.

Optical Network Management System for PON (ONMS-PON)
The JDSU ONMS PON test system includes an OTU-8000 remote test unit in the CO, reflectors at the PON terminations, and a server application that technicians can access in the field to control the OTU-8000.

Optical Spectrum Analyzers (OSA) for WDM and ROADM Testing
Full range of OSAs for spectral measurements in CWDM, DWDM, and ROADM-based systems, providing true OSNR measurements based on the unique JDSU in-band OSNR method.

Optical Switch Module (OSM)
Range of fully non-blocking optical switch modules from Polatis designed for OEM integration.

Optical Switch Tray (OST) Multimode
Multimode optical switch trays from Polatis that utilize DirectLight® beam-steering technology to deliver high performance in a compact, fully non-blocking, multimode product.

Optical Switch Tray (OST) Single Mode
Range of fully non-blocking optical switch units from Polatis designed for 19" ANSI and ETSI rack equipment practice.

ORL-55 SMART Optical Return Loss Meter
High-performance instrument for field, production, and lab; operates as return loss meter, optical power and loss meter, and laser source.

OTDR Modules for T-BERD®/MTS-4000 Platform
Interchangeable OTDR modules covering Access/FTTx network applications.

OTDR Plug-In Modules for T-BERD®/MTS-6000, -6000A, -8000 Platforms
Field interchangeable OTDR plug-ins covering multimode and single-mode networks. Very short distance to ultra long haul at any wavelength: 850,1300, 1310, 1383, 1490, 1550, and 1625 nm.

OTS-55 Optical Talk Set
Provides clear digital voice transmission over a single fiber; hands free operation makes communication convenient for technicians using a headset or speaker phone mode.

OTU-8000 Optical Test Unit for the ONMS
Rack-based unit for the Remote Fiber Test system that combines OTDR and optical switch technology to allow a single OTU-8000 to test hundreds of fiber links within a 40,000 km2 area.

Outsourced Calibration Services
A complete solution for all of your calibration needs.

OVF-1 Visual Fault Locator
For fault location in fiber optics networks.

OVIP-250/OVIP-400 Video Inspection Probes
Portable video inspection scopes for verifying fiber optic terminations.


P
PA-25 and PFA-35 E1 and Data Testers
Full line of field service testers for installing, commissioning, and maintaining E1 and data circuits as well as associated services.

PacketMaker SAS/SATA Tester
PacketMaker is a flexible traffic generation product for high-speed serial storage buses.

Paragon - Inline Impairment Test Solution
Captures and replays real-world PDV profiles in a repeatable, controllable environment; allows quick identification of corruption and disruption events via a simple-to-use graphical interface.

PathTrak Return Path Monitoring System
Simultaneous return path monitoring, live remote client spectrum views, constant performance history, and remote spectrum views on field meters.

PathTrak Video Monitoring System
For QAM and Analog RF testing, including MER, BER, and level; provides remote analysis of CATV forward path systems.

PathTrak WebView Server
Allows remote access to the live spectrum analyzer; provides performance history reports, and automates the node certification process allowing operators to prioritize their workforce more efficiently.

PCI Express (PCIe)
The new and advanced Bus Doctor Gen 2 PCIe protocol analyzer supports bi-directional traffic capture and analysis of PCIe x1, x4 and x8 modes. Powerful pre-filtering and triggering options permit engineers to home in on any sequence of PCI events or conditions. In the x8 configuration, up to 18.4 GBs of capture buffer is available.

PCM-40 PCM Channel Analyzer
PCM channel analyzer for CODEC and line card tests; supports automatic test sequences by combining several test configurations from a range of stored setups.

PCS-40 Channel Selector
Measures a wide range of parameters of the device under test by interconnecting the PCS-40 PCM Channel Selector with the PCM-40 PCM Channel Analyzer and the analog terminal of a PCM multiplex unit.

PEVQ Video Analyzer
Performs perceptual quality of experience measurement on video according ITU-T J.247.

Plan-Um® AP Cabling Project Management Software
Makes every structured cabling installation more professional and profitable.

PMD Plug-In Modules for T-BERD®/MTS-6000, -6000A, -8000 Platforms
Provides fast, cost-effective polarization mode dispersion testing for Metro DWDM network testing.

Product Support Services
Services performed after the customer purchases JDSU test instruments. Designed to ensure proper functionality, extend the life, and reduce the total cost of ownership of the test instruments.

PS-33A Level Generator
Level generator for testing from 50 Hz to 2 MHz.

Public Training
Provides training for individuals and small groups of students from various companies at a JDSU-specified location. Courses cover technology and applications for the specified technology or product.

PVA-1000 VoIP Network Analysis Suite
VoIP/IMS analysis software and remote software capture agents.


Q
QT-200 xDSL & Triple-Play Probe
Provides unsurpassed ability to pre-qualify, provision, maintain, monitor, and troubleshoot xDSL triple-play services as well as copper loop and POTS lines.

QT-600 Ethernet Probe
Provides service turn-up verification, fault isolation, and troubleshooting for Ethernet and backhaul services.


R
RCATS Managed Services (RoamerNet)
Enables service providers to assess in real-time the quality and performance experienced by end users for voice, messaging, and data services.

RCATS QoS Management Systems
Allows mobile operators to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing dispatches and trouble tickets.

RCATS Remote Test Probes
Allow mobile operators to actively monitor and improve the quality of services delivered to their end customers.

RCATS Services Validations Packages
Allow mobile operators to actively monitor and improve the quality of services delivered to their end customers.

Re-Certification for Instrument Change of Ownership
For instrument certification and warrenty coverage when it changes ownership.

Repair Services
Either flat-rate pricing or time-and-materials pricing is available. Factory repair services install ECNs.

Resi-Talker™ Butt-In Telephone Test Set
Identify POTS dial tone with most economical butt set.

Resi-Tester™ Cable Tester
Perform essential physical cabling tests and wiring verification.

Resi-Toner™ Tone Generator
A full-function tone generator with unique features that further tests connections on telephone systems and speaker installations; finds outlets and assures connections.

Resi-Tracer™ Probe
Combines unique new features for tracing telephone, network, coax, and audio cable with special functions for finding and phasing speakers and testing telephone systems.

RF Analyzer JD7106A
Multi-purpose solution for the analysis of RF systems covering all physical aspects of transmission, reception, and interference of RF systems.

Ruggedized Small Channel Count Switch Module
Switch for incorporating customized test assemblies and specialized applications operating multiple source measurement instruments, such as optical spectrum analyzers, wavelength meters, and power meters.


S
Satellite Signal Strength Meter
Simple mechanical device used to maximize a satellite signal between the LNB amplifier and the receiver.

SDA-4040D Stealth Digital Analyzer
Delivers precision "find and fix" measurement tools that will reduce critical test time when analyzing and qualifying broadband performance.

SDA-5000 Stealth Digital Analyzer
RF sweep receiver with digital and analog signal analysis for broadband cable networks.

Sectionalizer Fault Isolation Software
Software that, when combined with the T3AS Test and Performance Monitoring System, allows service providers to quickly pinpoint where faults occur.

Series 2000 80x80 Matrix Switch
The Polatis Series 2000 Optical Switch is a high-performance, fully non-blocking all-optical 80x80 matrix switch. It is designed to meet the highest performance and reliability needs of the most demanding applications with exceptionally low optical loss, compact size, low power requirements and fast switching speeds. The Series 2000 is based on Polatis’ optical switching technology that is used by optical component manufacturers as the connectivity benchmark with which they test their equipment.

Service ValuePak for Instruments
Comprehensive, lifetime support for all of your JDSU instruments.

Service ValuePak for Systems
Offers initial and ongoing support that encompasses the entire life cycle of JDSU systems products.

Shadow TAP
The Shadow TAP 10/100 is a single-port tap device for viewing traffic on a full-duplex or half-duplex 10/100 UTP (Unshielded Twisted Pair) Ethernet segment on intrusion detection systems (IDS), protocol analyzers, network monitoring devices, etc. Typically, the Shadow TAP 10/100 is deployed on a critical link in a network where direct network monitoring and analysis capabilities are important.

Single Source Repair
Complete instrument repair services for all of your test instruments. We offer a single solution that handles all logistical, technical, and accounting activities.

SITT Mobile Services Test Platform
Background load generators for network verification, integration, and traffic simulation of mobile data traffic; easy-to-use, portable, and cost-effective traffic simulator ideally suited for GSM/GPRS/UMTS environments.

SITT-IMS Scalable Intensive Test Tool for IMS
Cost-effective and easy-to-use traffic load test generator for load testing IMS networks with up to 500,000 users in less than 30 minutes.

Small Channel Count Switch Module
Prism-Based Switch Modules ideal for incorporation into customized test assemblies and switch modules.

SmartClass ADSL
Handheld ADSL1/2/2+ services installation and maintenance point solution for field engineers.

SmartClass E1/Datacom Tester
Handheld field tester for installing and commissioning E1 and Datacom service; offers multiple test modes for E1 and Datacom signal analysis.

SmartClass Ethernet
Entry-level Ethernet test solution for up to 1G electrical/optical Ethernet interfaces with VLAN, Q-in-Q tags, or MPLS labels and verification of Carrier Ethernet SLAs.

SmartClass Home FULL
Speeds verification of VDSL and HPNA communications, and associated wiring, ensuring quality of triple-play services.

SmartClass Home HPNA
Speeds installations of HPNA home networking services and troubleshooting of inside wiring issues.

SmartClass IW-1000
Enables faster premises wiring installation and more accurate troubleshooting of associated wiring issues.

SmartClass Triple Play Services (TPS)
All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing.

Speaker Seeker™ Wiremapping Tester
Perform wiremapping of speaker, security/alarm wire, and coax.

SPM-32A, SPM-33A, SPM-35A, and SPM-36A Selective Level Meters
Selective level meters (50 Hz to 620 kHz, 2 MHz, or 3.5 MHz) for conformance testing on digital interfaces.

StealthWare
Data analysis software for advanced analysis, reporting, printing, and archiving of test results.

Swept Wavelength Systems (SWS2000 and OMNI Expansion Series)
Test solution for characterizing wavelength dependence of passive optical components; Includes tunable laser source, source optics module, receiver chassis, control module, detector modules and application software.

SystemCare Center Support Engineer
An assigned system engineer provides on-site support, including supplemental hands-on training, operational process improvement, enhanced technical support, system administration support, and on-site repair.

SystemCare Deployment Services
Full installation, integration, configuration, and program management services ensure effective implementation of JDSU systems.

SystemCare Expedited Module Hardware Sparing Support
When TAC diagnoses a module failure, a new module is shipped out overnight prior to receiving the broken module.

SystemCare Extended Technical Assistance Center (TAC) Support
Toll-free hotline 24/7 support and on-site support, if necessary, to resolve a system problem.

SystemCare Inventory/Configuration Check and System Usage Reports
Get a better understanding of what you have deployed in your network using a Site Configuration Report to summarize the status of each site.

SystemCare Remote Software Upgrades
From a centralized, remote location, elements are upgraded throughout your test system.

SystemCare Software Enhancement Agreement
Keep up-to-date with the latest software by automatically receiving all software releases, including corrections and enhancement releases.

SystemCare System Management
A modular service plan to keep your networks up and running at full capacity.

SystemCare System Training
Operators and system administrators become comfortable with their system, and they are able to use the system to its fullest capacity.


T
T3AS Test and Performance Monitoring System
In-line remote testing and monitoring system for DS3, DS1, and DS0 circuits at sites where digital cross-connect systems are not located.

Talk-N-Trace™ Communication and Tracing Device
Hands-free personal communications set that can be used in any wiring environment.

T-BERD® 4000 Multiple Services Test Platform
Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance.

T-BERD® 6000 Compact Optical Test Platform
Compact, lightweight test platform designed for installing and maintaining fiber networks; can perform full fiber characterization measurements.

T-BERD® 6000A Compact Network Test Platform
Multi-layer compact network test solution for network installation and maintenance of metro core networks.

T-BERD® 8000 Scalable Optical Test Platform
Completely scalable solution for optical network installation, commissioning, maintenance, and troubleshooting.

TechComplete Home Certification Testing Solution
Empowers cable operators to increase customer satisfaction by utilizing customized, automated testing procedures to significantly reduce repeat service calls and increase productivity.

TechComplete Test Productivity Pack
Software for maintaining and optimizing DSAM meters; provides Field Data Management, Meter Browser Management, and DSAM Remote Access.

Telecom Protocol Analyzer 8631
Based on PCMCIA card or Express Card/54 used for testing all fixed interfaces of mobile radio networks, access networks, SS#7, NGN, WiMAX, GSM-R, and CDMA networks.

Telecom Protocol Analyzer 8632
Probe based protocol analyzer for remote testing of all fixed interfaces on GSM, GSM-R, GPRS, CDMA, UMTS, WiMAX, V5, ISDN, GR303, NGN/VoIP/IMS, and SS#7 networks.

Telecom Protocol Analyzer 8635
Tests all fixed interfaces on GSM, GSM-R, GPRS, CDMA, UMTS, WiMAX, V5, ISDN, GR303, NGN/VoIP/IMS, and SS#7 networks.

Tell-All™ Indicator Phone and Data Line Identifier
Identifies telephone and data lines.

Test and Turn-Up Assistance
Final certification and configuration for customers who prefer to perform installations themselves.

Test Automation Services – Custom Test Systems
Building custom-test stands for labs and manufacturers, automating testing for field applications, and automating testing and reporting for systems assurance systems are capabilities that we have. JDSU has a comprehensive portfolio of test equipment and our experience allows us to perform custom test automation with a short, fixed schedule and a competitive fixed price.

Testifier™ Cable Tester
Performs essential physical cabling tests and wiring verification for telco, network, and coax cable; includes tone generator and LCD display.

TestifierPRO™ Cable Tester
Measures cable length, conducts single-ended cable tests, blinks link indicators, identifies cable runs, and generates tone for telco, network, and coax cable. Includes LCD display.

TestPoint 10Gbps
Hot-swappable module for TestPoint TS-30/TS-170 and a configuration in the TS-10 that provides traffic generation, analysis and impairments for multiple line rates and technologies.

TestPoint 1Gbps
Single slot module provides one or two optical/electrical Gigabit Ethernet or 1G/2G Fibre Channel ports and traffic generation to 128 streams for on Gigabit Ethernet.

TestPoint 40Gbps
Module for the TS-30 and the TS-170 that provides SONET/SDH testing at OC-768/STM-256 with PRBS traffic and Digital Wrapper and FEC support at 43 G.

TestPoint Group Controller
Optional single slot module provides a single point of test system management access when the TestPoint chassis contains multiple test modules.

TestPoint Multi-Rate
Single slot, customizable module controlling via licensed options: OC-48/STM-16, OC-12/3/STM-4/1, Gigabit Ethernet, and 1G/2G Fibre Channel and traffic generation to 128 streams for Gigabit Ethernet.

TestPoint TS-chassis (TS-10, TS-30 and TS-170)
Modular chasses (three formats) for configuring interface types, transmission rates, protocols, and port density with support for multiple rates on a single port.

THG/Surveyor Ethernet Analyzer
The Surveyor/THG Ethernet Analyzer combination uniquely enables network managers to monitor, measure, analyze and troubleshoot their entire enterprise LAN using a single software interface and one full line rate, full duplex hardware platform.

TLS-55 SMART Optical Tunable Laser Source
The most compact tunable optical laser source for field applications; designed to support ROADM network channel routing applications.

Tonax™ Coax Tone Generator
Generate tone for cabling identification and troubleshooting, tone through splitters on coax systems.

Tone Generator™
Generate analog tone for cabling identification and troubleshooting.

Tone-Tracer
Receive analog tone for cabling identification and troubleshooting.

Trace-Rite™ Tone Generator and Tone Tracer
High-sensitivity tracer for location of network, telephone, and coax cable; Finds wires behind walls, floors, and ceilings.

Train-the-Trainer & Course Licensing
To utilize internal trainers, customers can provide licensing of course material on a yearly basis. This provides an alternative that allows customers to start training their technicians quickly and minimize additional training expense. As a part of course licensing, JDSU must also prepare the customer's trainers for delivering the course.

Transport Module for T-BERD®/MTS-8000 Platforms
Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gb/s.

Triple-Play Services Software Option for the T-BERD®/MTS-4000 Multiple Services Test Platform
Module for comprehensive IP service-level testing (voice, video, data) for FTTx, Access and Home network turn-up, troubleshooting, and maintenance.

Tri-Porter™ Premises Wiring Tester for Voice, Data & Video
Triple-Play tester performs the work of multiple tools: DSL-safe butt set, network tester, tone generator, cable tester, tone detector, and coax mapper.

TrueLength™ Cable Length Meter
Measures conductor length, displays distance to opens or shorts, and generates tone for copper or aluminum wires.

TSR-37 Rubidium Timing Signal Reference
Portable timing reference source for telecommunications and metrology test and measurement applications.

Turbo-Tone™ High-Powered Tone Generator
Strongest tone generator on the market; generates as much as 700% more power than standard tone generators.


U
UltraFED
Enables copper test up to 30 MHz by a single technician; addresses test challenges associated with the pre-qualification and troubleshooting of VDSL and ADSL2+ networks.

USB 1.1 Analog-to-Digital Converter
Digital Converter for FBP Probe Microscopes


V
Validator™ and Validator-NT™ Ethernet System Speed Certifiers
Conducts Ethernet speed validation, measures SNR and Skew, verifies wiring configuration, and enables port discovery; Plan-Um software creates layout and documents cable tests.

ValidatorPRO™ and ValidatorPRO-NT
ValidatorPRO and ValidatorPRO-NT Ethernet speed certifiers with integrated optical power meters are the first all-in-one handheld testers that help installers ensure performance of copper, fiber and wireless LAN installations with copper Ethernet speed certification, an optical power meter and wireless 802.11b/g/n features.

VDSL Copper Qualifier (ELQ 30)
Handheld tester for single-ended copper tests as well as fully automated end-to-end tests with two instruments.

Vega Media Analyzer
Provides efficient debugging point in broadcast, media enabling, system integration, and technology development.

Virtual Classroom
Provides training for students located at different locations using online tools. Courses focus on technology and applications, and the class is led by an instructor. Both public and single customer courses are available.

VOA and Power Meter Switch (VST)
Ideal integration of optical switching, attenuation, and power monitoring in a single, compact package from Polatis.


W
Windows® PC Detailed Decoder
ISDN PC analyzer for quick and easy troubleshooting on ISDN installations.

Wi-Net Window Wireless Tester
Identify, clarify, and configure all wireless transmission equipment on a site; provides a clear picture of the range and availability of each wireless access point.


X
Xgig 10GbE/FC/FCoE Analyzer
JDSU's Xgig 10GbE and Fibre Channel Analyzer is a versatile, state-of-art solution for monitoring and analyzing live traffic of different storage protocols, including 10G Fibre Channel, 10GbE, iSCSI, FCIP, iFCP and iWARP.

Xgig 6G SAS/SATA Analyzer
The Xgig SAS/SATA analyzer is a critically-important tool for engineers developing and troubleshooting products and systems that involve the SAS/SATA protocols.

Xgig 6G SAS/SATA Traffic Generator and Target Emulator
JDSU’s powerful Traffic Generator and Target Emulator extends the capabilities of the Xgig Analysis and Test Platform to create network traffic at line rate to stress test equipment during development and in-network.

Xgig Expert
Expert software comes standard with all Xgig Analyzers and Bus Doctor Rx Protocol Analyzers to provide a unique and robust set of debugging and analysis capabilities specifically designed to accelerate and simplify device development and troubleshooting.

Xgig Fibre Channel Analyzer
The Xgig Fibre Channel Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market.

Xgig Fibre Channel BERT
The Xgig BERT (Bit Error Rate Tester) provides a low cost solution that simplifies signal integrity verification and high-speed bit error measurements by injecting data patterns into the traffic stream that create worst-case data loading conditions and stress a network's physical layer to its limits.

Xgig Fibre Channel/FCoE Load Tester
With the Xgig Load Tester, developers are able to quickly and easily verify data integrity, monitor network performance, and identify a wide range of sophisticated problems across even the most complex network topologies that would be otherwise too difficult to troubleshoot with an analyzer alone.

Xgig GbE/iSCSI Protocol Analyzer
Xgig, designed for heavy-duty data traffic and complicated network structures, offers the industry a reliable analysis tool for high-bandwidth protocols such as GbE and iSCSI.Xgig® GbE/iSCSI Analyzer

Xgig Jammer
The Xgig® Jammer manipulates live network traffic to simulate errors in real time, enabling users to verify the responsiveness and robustness of error recovery processes.

Xgig Protocol Analyzer Family Overview
The Xgig® Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market. With its wide range of capabilities, including intelligent triggering, automated capture, and Xgig Expert analysis, troubleshooting time is reduced from hours to minutes.

Xgig Secure System Overview
The Xgig Secure System performs testing of Fibre Channel interfaces configured in any topology including those used in avionic environments. A single system can provide traffic generation, error injection, and advanced analysis across 16-ports (maximum) with data rates from 1Gb/s to 10.5Gb/s.